What Size Should a QR Code Be?
Print a QR code at least 2 cm (0.8 inch) wide if it is read from hand distance, and make it about one tenth of the scanning distance if it is read from further away. Leave an empty border around it and it will scan.
Updated November 4, 2026
The 10-to-1 rule
The size of the code depends on how far away the phone will be. Divide the scanning distance by 10 to get the width of the code. A code read from 50 cm away needs about 5 cm. A code read from 3 meters needs about 30 cm. This is a rule of thumb, not a standard, so test your own print (see below).
Print size chart
| Where it is printed | Scanned from | Code width (at least) |
|---|---|---|
| Business card, product label, gift tag | 20 to 30 cm (8 to 12 in) | 2 to 3 cm (0.8 to 1.2 in) |
| Flyer, menu, table tent | 30 to 50 cm (1 to 1.6 ft) | 3 to 5 cm (1.2 to 2 in) |
| Poster at arm's reach | 1 m (3 ft) | 10 cm (4 in) |
| Shop window or yard sign | 2 m (6.5 ft) | 20 cm (8 in) |
| Large sign or banner | 3 m (10 ft) | 30 cm (12 in) |
Four things that change the size you need
- Leave the border. Add an empty margin of about four squares on every side. It is not part of the pattern, but the camera needs it to find the code.
- Shorten what is inside. A long address makes many tiny squares, and tiny squares need more room. A dynamic code stores a short address, so it stays simple and can be printed smaller. See static vs dynamic QR codes.
- Keep the contrast high. Dark squares on a light background read at smaller sizes than low-contrast colors.
- Think about the surface. A curved bottle, a glossy finish or a rough material blurs small squares. Go larger on those.
Export it big, scale it down
Make the image large (or as SVG) and shrink it in your layout. Do not stretch a small image up, because that blurs the edges. Set the print size in your design tool, and check it by printing at 100%.
How many pixels do I need?
For print, aim for about 300 pixels per inch at the final size. A 5 cm (2 in) code needs an image at least 600 pixels wide; a 10 cm (4 in) code needs about 1,200. Each square of the pattern should be at least a few printer dots wide, so a dense code on a small label needs a higher resolution than a simple one. SVG has no pixel limit, so use it for signs and banners.
Test before a full print run
Print one at the real size on the real material. Scan it with two phones, one of them older, from the distance a customer will stand at. If it fails, work through the fixes for a QR code that will not scan. A checklist for permanent QR codes covers the rest of what to check before you print. If the code is going on a brochure, a menu or a poster, the print materials guides show where the size and the quiet border usually go wrong on each one.
Frequently asked questions
What is the minimum size for a QR code?
A common minimum is about 2 cm (0.8 inch) square for a code scanned from hand distance, such as on a business card or a product label. Smaller codes can work, but only with a short address, high contrast and a good printer.
How do I work out the size from the scanning distance?
Use the 10-to-1 rule: divide the scanning distance by 10. A code read from 1 meter away should be about 10 cm wide, and one read from 3 meters away about 30 cm wide.
Does the blank border count in the size?
Measure the pattern itself, then add an empty border of about four squares on every side. Text or artwork inside that border can stop the camera from finding the code.
Can a QR code be too big?
Not really, as long as the whole code fits in the camera view from where people stand. Very large codes only fail when the scanner is so close that the camera cannot fit the full pattern in the frame.
Does a longer link make the code need to be bigger?
Yes. A static code with a long address has more, smaller squares, so it needs more room to scan. A dynamic code stores a short redirect address, so its pattern stays simple and can be printed smaller.