Why Is My QR Code Not Scanning? 8 Fixes
A QR code that will not scan almost always has one of a few causes: it is too small, too faint, too crowded, squeezed against other artwork, or its link is dead. Work down this list and you will find yours.
Updated November 4, 2026
First, find out which problem you have
Not sure your phone is set up to read codes at all? Start with how to scan a QR code on iPhone and Android. Otherwise, try the code with your phone camera and ask one question: does the phone fail to recognize the code, or does it recognize it and open something wrong? These are different problems.
- The camera never picks it up: the problem is the picture. Fixes 1 to 7 below.
- It scans but opens an error or the wrong page: the problem is the destination. Go to fix 8.
Eight fixes
- Raise the contrast. Use dark squares on a light background. Black on white is the safest. Light grey on white, or two similar colors, makes the code hard to read. The same goes for a large logo or heavy styling placed over the middle of the pattern: it hides squares the phone needs, so keep any logo small and test it.
- Do not invert it. Light squares on a dark background work on some phones and fail on others. Print dark on light.
- Make it bigger. A common minimum is about 2 cm (0.8 inch) square for a code scanned from hand distance. For a poster or a sign read from further away, scale it up, roughly one unit of size for every ten units of distance.
- Leave the blank border. A QR code needs an empty margin around it, about four squares wide. Text, photos or a box edge touching the pattern can stop the camera from finding it.
- Put less in it. A static code that holds a long address or a lot of text becomes a dense pattern of tiny squares. A short address gives bigger, easier squares. A dynamic code always stores a short address, so the pattern stays simple whatever the destination is. See static vs dynamic QR codes.
- Keep the picture sharp. Do not stretch the code, blur it, or compress it into a tiny low-resolution image. Export it at a large size, or as SVG, and scale it in your layout.
- Watch the surface. Glare, a curved bottle, a crumpled sticker or a dark glossy finish can all stop a scan. Test on the real material, in the light where it will be used.
- Check the destination. If the code scans but the page is dead, the code is fine and the link is not. Open the address in a browser. If it was a dynamic code, change the destination (see can you edit a QR code after printing). If it was static, redirect the old address on your own site or replace the code.
Test before you print
Print one on the real material at the real size, then scan it with at least two phones, one of them older. Try it from the distance a customer will stand at. Fixing it on one proof is far cheaper than reprinting a run. How to make a QR code permanent has a full checklist to run before you print. If the failing code sits on a sticker or a product tag, the tags and labels pages cover the small-surface problems that cause most of those misses.
If you think the code stopped working
A code that scanned last month and fails today is usually a destination problem: the page moved, the site went down, or a plan lapsed. The squares do not wear out on their own. Read do QR codes expire? for what really stops a code.
Frequently asked questions
Why is my QR code not scanning?
The usual causes are low contrast between the squares and the background, a code that is too small, no blank border around it, too much data packed into the pattern, a stretched or blurry image, and a destination link that no longer works.
How big should a printed QR code be?
A common rule is at least 2 cm (about 0.8 inch) square for a code scanned from hand distance, and larger for anything scanned from further away. A rough guide is one unit of size for every ten units of scanning distance.
Can I use light squares on a dark background?
Some phones read inverted codes and some do not. Dark squares on a light background is the safe choice that every scanner reads.
My QR code scans but opens an error page. What now?
The pattern is fine and the destination is the problem. If the code is dynamic, edit the destination to a working page. If it is static, redirect the old address on your own site, or replace the code.
Why does my QR code scan on one phone but not another?
Borderline codes, such as dense patterns, small prints, low contrast or inverted colors, work on some cameras and fail on others. A simpler, larger, high-contrast code scans on all of them.